The tool palette at a glance
Every registered tool with purpose, example and further reading.
Updated:
How to use this reference
The palette is organized by task. First decide whether you are drawing, editing geometry, arranging whole bodies or checking an assembly. Read the next step in the active tool context. Activating a tool through MCP may require manual input. The CAD tools below are not automatically fully controlled by AI. The MCP reference lists the actual automatic commands separately.
Complete reference
Select
Select faces, edges, points and bodies deliberately.
Example: Select the whole box before moving it.
Selection: face, edge or body? →Push/Pull
Extrude closed faces or edit existing material.
Example: Extrude a rectangle into a 5 mm plate.
Create solids with Push/Pull →Move
Translate selected geometry relative to a reference.
Example: Move an independent body 20 mm along X.
Arrange bodies and create patterns →Rotate
Rotate around a deliberate pivot and axis.
Example: Rotate a lid around its bearing axis instead of its center.
Arrange bodies and create patterns →Scale
Scale a selection; functional dimensions change too.
Example: Scale a test model uniformly by 0.5.
Arrange bodies and create patterns →Dimension
Inspect or edit dimensions using suitable geometric references.
Example: Check plate width before printing.
Dimensions, grid and fixed references →Sketch plane
Create an independent drawing plane on or outside a model.
Example: Create a tilted plane for an inclined addition.
Sketches and closed profiles →Line
Draw straight segments for technical profiles.
Example: Draw a closed triangular support profile.
Sketches and closed profiles →Rectangle
Draw rectangular closed base profiles.
Example: Create a 40 by 25 mm rectangle.
Sketches and closed profiles →Circle
Create circles using a deliberate center and diameter.
Example: Draw a Ø6 mm hole profile on a plate.
Sketches and closed profiles →Slot
Create a slot as one continuous profile.
Example: Draw an elongated mounting slot before cutting.
Sketches and closed profiles →Polygon
Draw closed profiles with multiple straight sides.
Example: Create a hexagonal outline.
Sketches and closed profiles →3-Point Arc
Define an arc by start, through and end points.
Example: Connect a profile corner with a deliberate arc.
Sketches and closed profiles →Center Arc
Create an arc from a center and angular references.
Example: Draw a circular profile segment around a fixed center.
Sketches and closed profiles →Tangent Arc
Draw a tangent continuation using the tool workflow.
Example: Continue a line without a sharp direction change.
Sketches and closed profiles →Spline
Describe free curves using suitable control points.
Example: Draw a smooth handle side profile.
Sketches and closed profiles →Text
Create lettering outlines for subsequent modeling.
Example: Create readable lettering before embossing.
Text, embossing, reference images and color →Offset
Offset a suitable profile in parallel.
Example: Create a second outline at a 2 mm offset.
Trim, offset and round sketches →Construction line
Draw reference geometry for alignment and dimensions.
Example: Create a centerline for symmetric holes.
Dimensions, grid and fixed references →Eraser
Remove unwanted drawing elements deliberately.
Example: Remove a duplicate profile line.
Trim, offset and round sketches →Trim
Trim a segment to suitable boundaries.
Example: Trim an extending line at an intersection.
Trim, offset and round sketches →Extend
Extend a segment to a suitable boundary.
Example: Close a profile gap against an existing boundary.
Trim, offset and round sketches →Sketch fillet
Connect two straight legs with an analytic fillet.
Example: Fillet one rectangular sketch corner R2.
Trim, offset and round sketches →Sketch chamfer
Replace a sketch corner with a straight chamfer.
Example: Chamfer a corner 1 mm before extrusion.
Trim, offset and round sketches →Ellipse
Draw a closed elliptical profile.
Example: Create an oval with two different axis dimensions.
Sketches and closed profiles →Elliptical arc
Draw a bounded elliptical arc.
Example: Add an elliptical segment to a profile.
Sketches and closed profiles →Edit
Edit existing geometry in the appropriate selection context.
Example: Select a face rather than the whole body for a shape edit.
Selection: face, edge or body? →Hollow
Hollow a solid using selected openings and wall thickness.
Example: Create an open tray with 2 mm walls.
Hollowing solids →Thread
Define a thread with a fit preset, optional entry chamfer and export geometry verification.
Example: Test a short thread pair before printing the full design.
Create and print threads →Split body
Split a body along a defined plane.
Example: Divide a long body into two editable halves.
Union, subtraction, intersection and split →Combine
Unite, subtract or intersect material.
Example: Subtract a hole tool from a plate.
Union, subtraction, intersection and split →Revolve
Revolve a profile around an axis in its plane; new bodies retain selected sketch profiles and axes.
Example: Create an open vase from a wall section, then edit its source.
Revolve, loft and sweep →Follow
Carry a profile along a matching path; selected sketch profiles and paths including splines remain linked.
Example: Sweep a circle along an arc, then change the section diameter.
Revolve, loft and sweep →Loft
Join ordered sections; new bodies follow later changes to their sketch sources.
Example: Build a smooth handle through three ellipses, then widen the middle section.
Revolve, loft and sweep →Emboss
Transfer profiles as an embossing onto suitable support.
Example: Emboss bounded-height lettering on a housing.
Text, embossing, reference images and color →Align
Align bodies using suitable reference placements.
Example: Align two independent plate edges.
Arrange bodies and create patterns →Mirror
Mirror geometry across a deliberate plane.
Example: Create a mirrored counterpart of a bracket.
Arrange bodies and create patterns →Contour pattern
Distribute bodies regularly around an axis.
Example: Distribute six holders around a full circle.
Arrange bodies and create patterns →Sketch pattern
Distribute sketch elements using the pattern workflow.
Example: Arrange repeated profiles at consistent spacing.
Sketches and closed profiles →Paint
Assign appearance color without changing material or shape.
Example: Color lid and housing differently for inspection.
Text, embossing, reference images and color →Horizontal
Align horizontally in the sketch plane.
Example: Keep a baseline horizontal.
Organize sketches with constraints →Vertical
Align vertically in the sketch plane.
Example: Keep a side line vertical.
Organize sketches with constraints →Parallel
Keep element directions parallel.
Example: Keep two long sides parallel.
Organize sketches with constraints →Perpendicular
Define a right angle between elements.
Example: Join two profile legs at a right angle.
Organize sketches with constraints →Equal
Keep suitable dimensions equal.
Example: Keep two lines at equal length.
Organize sketches with constraints →Midpoint
Keep a point at a suitable midpoint.
Example: Place a reference at a segment midpoint.
Organize sketches with constraints →Concentric
Give suitable profiles a shared center.
Example: Prepare two circles with a shared center.
Organize sketches with constraints →Tangent
Define a tangent transition.
Example: Join a line and arc tangentially.
Organize sketches with constraints →Collinear
Keep straight elements on one common line.
Example: Align two separate line segments.
Organize sketches with constraints →Symmetry
Mirror two matching lines, arcs, circles or splines about a straight axis: pick leader, follower, then axis.
Example: Mirror two open spline halves of a heart about a fixed centerline.
Organize sketches with constraints →Curvature
Relate curvature transitions of suitable curves.
Example: Prepare a smoother curve transition.
Organize sketches with constraints →Coincident
Keep suitable points coincident.
Example: Connect two profile endpoints.
Organize sketches with constraints →Fix / Unfix
Fix selected geometry against free changes.
Example: Keep a reference profile in its placement.
Organize sketches with constraints →Motion lab
Review relationships and motion context.
Example: Review connected partners before testing.
Inspect motion and joints →Gear coupling
Couple suitable rotations with a gear ratio.
Example: Link two shafts at a defined ratio.
Inspect motion and joints →Rigid joint
Hold a fixed relative pose.
Example: Hold a bracket fixed to a base.
Inspect motion and joints →Revolute joint
Allow rotation around a defined axis.
Example: Test a lid around its hinge axis.
Inspect motion and joints →Slider joint
Allow guided linear translation.
Example: Test a carriage along its guide.
Inspect motion and joints →Cylindrical joint
Allow rotation and translation along one axis.
Example: Describe a sleeve moving on a shaft.
Inspect motion and joints →Ball joint
Describe ball-joint rotation.
Example: Inspect orientation of a moving partner.
Inspect motion and joints →Planar joint
Describe motion relative to a plane.
Example: Define a planar guide relationship.
Inspect motion and joints →Distance link
Define distance between suitable references.
Example: Control separation between two partners.
Inspect motion and joints →Screw joint
Couple rotation and axial advance.
Example: Describe a screw-drive relationship.
Inspect motion and joints →