Sketches and closed profiles
Planes, rectangles, circles, lines, arcs, splines and text as the basis of solids.
Updated:
Choose a plane
Draw on a suitable model face or use an independent sketch plane. Independent planes can be moved and rotated separately. Check placement before drawing: a tilted plane also creates tilted profiles.
Choose the drawing tool
Lines and polygons suit straight technical outlines. Rectangle, circle, ellipse and slot tools save individual segments. A three-point arc uses start, through and end points; other arc tools use different references. Splines suit free curves. Construction lines establish references and are not themselves material profiles. Text creates lettering outlines for later operations. Very small letters and narrow counters can cause embossing or printing difficulties.
Check that profiles are closed
An extrusion face needs a closed planar outline without self-intersections. Tiny gaps, duplicate lines or crossing segments can prevent face creation. See trimming, offsets and corner editing. Example: a 40 by 25 mm rectangle extruded 5 mm makes a simple plate. A circle within a profile can describe an opening when the chosen modeling workflow uses that inner loop.
Free outlines with AI
MCP tools create closed spline profiles, join matching curves and support targeted fit-point changes. See hearts, splines and lettering with AI for a heart example and outline approximation limits.