Revolve, loft and sweep
Build rotational and guided shapes from suitable profiles.
Updated:
Revolve
A closed profile face rotates around an axis in its plane. Check the axis, angle and self-intersections. A cup can be built from a suitable wall cross-section; an unsuitable profile places material incorrectly.
Loft
A loft joins ordered sections. Profile order and orientation determine the transition. Start with two simple sections and inspect twisting before adding more.
Sweep / Follow
A sweep carries a profile along a path. The profile must match the path start. Tight bends can make material intersect itself. Twist is a design parameter, not a fix for a wrongly oriented start. Example: build a simple pipe bend using a circle and connected path. First check the solid foundation; then deliberately choose the wall and opening strategy.
Edit sources later
New bodies retain selected sketch profiles and existing sketch axes/paths. In the body’s parameter panel, “Edit source sketch” opens those sources. For example, change a handle’s middle section or a sweep section diameter; the full sequence is validated before committing. Model faces/edges and legacy bodies remain snapshots. See instructions, real examples and limits.