Hollowing solids
Turn a closed solid into a housing with controlled openings.
Updated:
Wall thickness and opening
Hollowing creates an inner offset and removes selected opening faces. Choose the body and the face to leave open, commonly the top of a straight box. The requested wall thickness must fit the tightest region.
Example: open tray
- Create a straight body with a 60 by 40 mm footprint and 20 mm height.
- Start Hollow and select the top face as the opening.
- Set 2 mm wall thickness; inspect inside and underneath.
- Apply the geometry, then add small internal/external chamfers.
Common limits
Tight rounds, thin necks or intersecting inner faces can prevent a valid offset. Adding many primitives is not automatically equivalent to clean hollowing. Confirm the opening is clear and the bottom remains. A lid is a separate body with its own fit. Hollowing does not itself design hinges, snap hooks or print tolerances.