Skip to content
ShapeAnywhere Wiki
Solid modeling

Create solids with Push/Pull

Extrude closed profiles, add material and cut pockets.

Updated:

From profile to solid

Push/Pull gives a closed face depth along its normal. Depending on selection and mode, it creates a new body, adds material or removes it. Always inspect the preview and target body. An extrusion on a tilted plane follows that plane. Moving the mouse upward on screen does not necessarily mean world Y. Numeric values and axis references are more reliable than perspective. New extrusions retain their source sketch for later outline edits. Open it or deliberately detach its link in the parameter panel. See Editing sketches and extrusions together.

Addition or pocket

An addition must actually contact its target to form one connected solid. A cutter must intersect material. A blind pocket ends inside the body; a through cut removes material beyond the opposite side. Example: add a centered Ø6 mm through-hole to a 40 by 25 by 5 mm plate. Inspect from below to confirm it is open. A circle drawn on the top is not yet a hole.

Diagnose failures

First check profile closure, plane and overlap. Simplifying a profile can help when the design is preserved. Do not silently change functional dimensions.