Export and prepare for 3D printing
Check dimensions, closed solids, placement, threads and clearances before printing.
Updated:
CAD to slicer
Save the project and select the intended print bodies. Export using available STL/3MF options, then open the result in a slicer. Check units, actual dimensions and model count. Creating an export file alone is not print approval.
Print orientation
A broad flat base helps first-layer contact. MCP examples use Y as height, so Y=0 is the XZ plane. A slicer may use a different up axis. Inspect the imported model rather than transferring axis names blindly.
Print-in-place
Moving parts remain separate solids with a defined shared pose. Export together, or import together without changing relative positions. Centering each part independently can destroy bearing alignment. Supports must not fill motion gaps.
Volume and mass
1000 mm³ equals 1 cm³; 1,000,000 mm³ equals 1 liter. Printed mass also depends on material, infill, walls and slicer paths. Do not infer final print mass from CAD volume alone. Test fits, threads and snap latches with a small trial print. Layer direction, shrinkage, bridges and printer accuracy affect function.