Skip to content
ShapeAnywhere Wiki
Arrangement & motion

Inspect motion and joints

Understand joint types, test poses and geometric interference.

Updated:

Describe degrees of freedom

Fixed locks a pose. Revolute, slider and cylindrical joints permit specific rotation or translation. Ball and planar joints have other freedoms. Distance and screw relationships couple selected values. Gear relationships require appropriate axes and a meaningful ratio. Select bodies and references through the tool workflow. An incorrect axis makes even matching parts move incorrectly.

Test pose versus saved pose

A motion check is not automatically the final print pose. Apply a pose deliberately. AI checks can rotate temporary copies while leaving the document unchanged.

Geometry is not material simulation

Overlap volume indicates rigid material contact. No overlapping volume does not prove positive minimum clearance: two parts can touch along a face. A snap latch often needs elastic deflection near closure, so rigid interference there requires interpretation. Five clear sampled angles prove neither an uninterrupted motion path nor strength.