Skip to content
ShapeAnywhere Wiki
Examples & reference

Example: mounting plate with two holes

A manageable exercise for dimensions, extrusion, holes and chamfers.

Updated:

Goal

A 60 by 30 by 5 mm plate has two Ø5 mm through-holes spaced 40 mm center to center. Both lie on the longitudinal centerline, 10 mm from the short ends. Outside edges receive a 0.5 mm chamfer.

Construction

  1. Draw a 60 by 30 mm rectangle on a defined plane and extrude it 5 mm.
  2. Locate hole centers symmetrically: X=-20 and X=20 mm when X is the long direction.
  3. Cut through the full thickness and inspect both openings.
  4. Select the intended outside solid edges and chamfer 0.5 mm.
  5. Check outer size, diameter and center spacing. Save the project before print export.

Lesson

Hole spacing is not the translation of the whole pair. When adding parameters, retain a fixed reference and state the intended effect. The parametric reference explains group placement and absolute target dimensions.