Skip to content
ShapeAnywhere Wiki
Examples & reference

Example: enclosure, lid and fit

Break an enclosure task into functional dimensions, walls and checks.

Updated:

Specify before modeling

Separate external dimensions, usable interior, wall thickness and lid type. An 80 by 60 mm enclosure differs from 80 by 60 mm usable internal space. Plug, hinged and screwed lids need different fits.

General construction

  1. Create the housing from external dimensions and hollow it with the intended opening.
  2. Create an independent lid with deliberate wall and rim geometry.
  3. Define mating surfaces and mechanical references. Both partners must share the same bearing axis.
  4. Add required clearances. Small chamfers help insertion and edge contact but do not replace a fit.
  5. Check individual solids, shared placement, openings and several functional poses separately.

Print-in-place and closure

Print-in-place partners remain separate and are printed together in alignment. A snap latch needs a flexible region, undercut and matching catch; an attached box is not yet a working snap hook. Printing and material behavior need a trial print. The optional MCP hinged-box generator is a convenience for one defined product type. General CAD tools and programs remain available for freely planned forms.