Fillet and chamfer solid edges
Select, check and preserve edge treatments in history.
Updated:
Radius or chamfer
A fillet replaces a sharp edge with a rounded transition. A chamfer creates an inclined straight transition. Select the intended solid edges and start with a small amount, such as 0.5 mm on a sufficiently large housing. Internal edges belong to the cavity; external edges to the outside shape. Opening rims add more edges. “All outside edges” does not mean every visible line: tangential seams are not sharp edges.
Available space matters
At convex edges, large treatments can consume thin walls, erase adjacent faces or self-intersect. A concave internal chamfer adds material and reduces cavity space; wall thickness alone does not determine its limit. Check the actual selection before reducing the amount. Inspect the cavity and wall connections after applying. The edge ring selects radius/chamfer and amount. A buffered value is still a draft; final confirmation creates the document edit. Later edits may depend on earlier edge operations. For MCP face/edge operations, query fresh topology and token after every geometry change. Old IDs are not permanent geometric names.
Select internal corners with AI
cad_get_topology reports convexity as concave, convex or unknown for each edge. edgeGroups contains matching IDs from the returned edge page; fetch all required pages if paginated. Classification covers clearly supported straight edges between planar faces. Curved, tangent or uncertain transitions remain unknown. The concave group identifies concave corners, rather than every edge inside an opening; also check position and adjacent faces. faceNormal filters faces only, never edges. Example: an open 80 × 60 × 25 mm box with 2.5 mm walls has four concave bottom-to-wall edges and four vertical internal corners. A 5 mm chamfer on those eight edges is possible and adds material inside. Upper inner rim edges are convex instead. selection="all" also includes rim and external edges, so it is unsuitable for this request. Use confirmed IDs from edgeGroups.concave with the current topologyToken. Inspect the resulting image and geometry; classification does not guarantee every amount will work on every shape.